Mercedes GL | ML | SLK | E 05-12 MOST25 Radio Replace w/SWC

MSRP $611.99 UPC 086429384457

This vehicle-specific interface is designed for use when replacing the factory radio in vehicles with MOST25* amplified audio systems, such as with Metra Electronics dash kits. It provides accessory 12-volt power, parking brake, reverse, and speed sense NAV outputs, retains audio controls on the steering wheel, and is micro “B” USB updatable.

Features:

Provides accessory power (12-volt 10-amp)
Provides NAV outputs (parking brake, reverse, and speed sense)
Retains R.A.P. (Retained Accessory Power)
Retains audio controls on the steering wheel
Easy to set DIP switches for SWC configuration
Retains balance
Micro “B” USB updatable

*Without OE Navigation (see radio images under vehicle applications tab)

Interface Components:

AXDIS-MB82 harness
AXDIS-MB82 interface
AXDIS-MB82 amplifier interface
AXSWC harness
AXSWC interface
Female 3.5mm connector with stripped leads

Note: Pickup and hang up buttons are not retained

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle specific applications.

Mercedes US Applications

C Class 2004-2007 (W203)
CLK 2005-2009 (W209)
E-Class 2009 (W211)*
GL 2007-2012 (X164)
ML 2006-2011 (W164)
R Class 2006-2011 (W254)
SL55-AMG 2005-2008 (R230)
SL63-AMG 2009-2012 (R230)
SLK 2009-2011 (R171)*

Mercedes World Applications

A Class 2004-2012 (W169)
B Class 2005-2011 (T245)
C Class 2004-2007 (W203)
CLK 2004-2009 (W209)
E Class 2002-2009 (W211)
GL 2006-2010 (X164)
ML 2005-2011 (W164)
R Class 2006-2013 (W254)
SL55-AMG 2002-2008 (R230)
SL63-AMG 2008-2012 (R230)
SLK 2008-2011 (R171)
Without OEM Navigation, Audio 20 Radio

*There are two different radio possibilities for the E-Class or SLK in this year range, please see below for ways to distinguish between which interface kit you will need.

*Vehicles equipped with Command NTG1 will use the AXDIS-MB132. NTG1 radios will be built by Harman/Becker and have the 6-Disc Changer separate from the radio, if equipped with a SINGLE-disc player, it will be built in to the radio. They will typically have buttons on the sides of, and below the radio screen, also the optical light will come from the fiber cable when removed.

*Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. NTG2.5 radios will be built by Alpine, and have the 6-Disc changer built in to the radio. They will not have buttons directly below the radio screen, and the optical light will come from the radio when the fiber cable is removed

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle specific applications.